Home Video Optical Transmitter 1ch Video Optical Transmitter
1ch Video Optical Transmitter PDF Print E-mail
Written by Acorid   
Sunday, 11 October 2009 17:06

 

OM610-1V↑1D↓WT/R

 

Specification：
    OLYCOM Digital Video Multiplxers adopt complete digital fiber transmitting mode, it can transmit more than 100 channels digital video, high-fidelity audio, telephone and low rate data(such as RS232, RS422, RS485, Manchester,BIPHASE and Binary input/Output). It adopts advanced digital technology such as DSP, FPGA, CPLD, to support dynamic and stationary picture high-fidelity transmitting and resist disturbance against intersectant signals and environment. It uses technical chip decorating on the whole surface and advanced switch, anti-electromagnetic wave radiation equipments, to make sure it can work continuously without troubles in any complex environment(eg. -35~+70℃ outdoor condition and electricity generating station). Complete digital technology of video insures that the video signals can be transmitted long distance without any waste, and the bandwidth of reverting video signals is over 8MHZ. Digital video multiplexer can make sure of high quality audio and video signals transmission no matter how complex the transmitting environment is.
 Key Features：
  Complete SMD components, 18 inches duralumin chassis, and standalone case
  Support hot plug and play, switch power supply
 Optical interface: FC,ST, SC (optional)
  Without EMI, RFI and ground loop
  8BIT and 10BIT quantification level is optional
 Abundant signal interface, such as video, data, audio, telephone, Ethernet, 
    binary input/output and talkback
  Perfect signal indicator for optical, video, data, audio, telephone, Ethernet,
    binary input/output and power supply
  Excellent data anti-thunder solution
  1310nm and 1550nm optional and max optical link loss is 30dB
  Standalone and module two types
  Standalone video multiplexer (1U chassis and standalone multiplexer),
    additional chassis is unnecessary
  Module type equipped with 18 slots chassis
 Application:
  City traffic monitoring system
  Police and safe city monitoring system
  High way security protection and toll station system
  Building and campus monitoring system
  Industrial monitoring(airport, chemical plant, steel, oil, railway, 
    irrigation works, mine and so on)
  Military monitoring(storage, frontier defense, guard, national defense and so on)
  Electronic power oil field, TV station program broadcasting system
  Gymnasium(live video and audio transmission)
 System design:
 
 Product information:
 Opitcal:
Output/Input Wavelength   1310nm&1470nm~1610nm
Output Power   -8~3dBm
Optic fiber
  50/125u multimode，62.5/125u multimode，9/125u single mode
Rx sensitivity
  -30dBm
Optical interface
  FC、ST、SC(optional)
 Video:
Number of Channels   1
Input/output impedance   BNC 75Ω (unbalance)
Standard video input/output voltage   2.0Vp-p
Video voltage range   0.6~2.0Vp-p
Differential Gain   < ±1%
Differential Phase   < ±1
S/N ratio   >60dB(weighting)(8 bit)
  >70dB(weighting)(10 bit)
Connector   BNC
 Audio：
Audio Input/output Impedance   600ohm(unbalance)
Max input/output voltage   2.0Vp-p
Frequency Response   10~20kHz
Total Harmonic Distortion   <0.05%
S/N ratio   >95dB(weighting)
Connector   Standard terminal lead
 Data:
Data protocol   RS232、RS422、RS485、Manchester，BIPHASE data
Data rate    0~300kbps
Error rate   10e-9
Connector   Standard terminal lead
 Ethernet:
Work mode   Full duplex/half duplex
Network speed   10/100Mbps(AUTO)
connection terminal   RJ45
 Telephone:
Connector   Standard RJ11
Phonetic bandwidth   8KHz
Work mode   Point to point hot line, program controlling switch/extension mode
Distortion   <1%
S/N ratio   >95dB
 Binary input/Output:
Connector   Terminal lead
Signal input    alarm, Binary input, support TTL、RS-232/422/485 or passive switch button
Signal output   Arbitrary alarm, Binary output, support TTL、RS-232/422/485 or relay output
Connector   Standard terminal lead
 Environmental
Work voltage   Chassis supply electricity(170V~240V AC auto-adaptation)
Work temperature   -35℃～+70℃
Humidity   0~95%non-condensing
 Mechanical
Standalone Dimension(H*W*D)   110mm *104mm *28mm
 Ordering information
OM610-1V↑1D↓WT/R   1 ch forward video + 1 ch reverse data
 Model Specification of Video Optical Tx/Rx:
◆Model OM600: OM600 series represent Video Optical Transmitter/Receiver 
610 represents Desk-Top one;620 represents in card
◆V: Video Signals . The front Arabic numeral represents thde number of signal channel,
↑is forward,↓is reverse,↑↓ means bidirectional.
◆A: Audio Signals. The front Arabic number represents the number of signal channel.
◆D: Data signals. The front Arabic number represents the number of signal channel.
◆K: Binary input/Output Signals. The front Arabic number represents the number of signal channel.
◆E: Ethernet signals. The front Arabic number represents the number of signal channel.
◆C: Telephone signals
◆S: single mode 1310nm
◆U: single mode 1550nm
◆M: Multimode 1310nm
◆W: Wavelength Division Multiples(WDM) 1310NM/1550NM
◆T/R: T is transmitter,R is receiver

 
ACORID Networks , Copyrights (C)2009 Shenzhen ACORID Technology Co., Ltd