Home Fiber LAN Card OM900-FE/Sxx
OM900-FE/Sxx PDF Print E-mail
Written by Acorid   
Sunday, 11 October 2009 16:14

 

OM900-FE/Sxx

 

Specification:


    OM900-FE/Sxx serial Fast Ethernet Fiber Network Interface Card is designed to operate at 100Mbps network and to provide a network throughput of 200Mbps in full-duplex mode. It offers a range of options, such as fiber / connector type and operating wavelength / distance, to meet the requirement of various applications. 
 

 Features:
 Plug and Play installation.
 Complies with the IEEE 802.3u 100Base-FX / IEEE 802.3ah 100Base-LX10 / -BX10 Ethernet standard.
 Standard optical fiber connector and cable type options.
 Full duplex or half-duplex operation.
 PCI Bus Master direct memory access for high throughput and low CPU utilization.
 IEEE 802.3x Flow Control enabled with full duplex operation, allowing enhanced operation when directly connected to a switch.
 IEEE 802.1Q/VLAN Tagging supported
 VLAN registration using IEEE802.1Q GVRP standard
 IEEE 802.1p Tagging supported
 IP Multicast packet filtering reduces CPU utilization and conserves network bandwidth.
 Large 2Kb Tx, 2Kb Rx FIFO buffers synchronize transmissions and buffer data to help prevent packet loss.
 Two LED indicators: Link/RxAct, Power/TxAct.
 Drivers for all leading Network Operating Systems.
 Software Drivers:

  Microsoft Windows 95, 98, 98 SE 
  Microsoft Windows 2000 
  Microsoft Windows XP 
  Microsoft NT 3.51 / 4.0 
  Microsoft Windows for Workgroups 3.11 
  Microsoft Windows CE.NET 4.0 / 4.2 
  Microsoft Client for DOS
  NDIS 2 driver
  NDIS 3 driver 
  NDIS 4 driver 
  NDIS 5 driver 
  Novell NetWare Client for DOS 
  Novell NetWare Client 32 for DOS 
  Novell NetWare Server 3.12, 3.2, 4.11, 4.2, 5.0, 5.1 
  ODI for DOS driver 
  32 bit ODI LAN driver 
  NCSA 
  FTP PC/TCP 
  SCO Open Server 5.0.x 
  RPL boot ROM 
  PXE Boot ROM 
  DMI Driver
 Specifications:

Optical Interface: Optical Ethernet 100Base-FX
  1、Dual single-mode fiber, single wavelength 1310nm, single SC/PC connector, operating distance 15km. 
  2、Single single-mode fiber, dual wavelength 1310/1550nm, single SC/PC connector, operating distance 20km. 
  3、Dual single-mode fiber, single wavelength 1310nm or 1550nm, dual SC/PC connectors, operating distance 60km. 
  4、Dual multimode fiber, single wavelength 1310nm, dual SC/PC connectors, operating distance 2km.

Host interface: PCI 2.1 Bus (Bus Master)

Physical Dimensions: 12.0 cm x 5.3 cm

Environment:
  Storage: -25℃~ 55℃ (-13°F~ 131°F)
  Operating: 0℃~ 50℃ (32°F~ 122°F)
  Humidity: 10% to 90% non-condensing
  Power Consumption: 2 Watts max

 
ACORID Networks , Copyrights (C)2009 Shenzhen ACORID Technology Co., Ltd